Precautionary allergen labelling is a voluntary statement such as “may contain nuts” that flags an allergen which could arrive through cross-contact. EU law sets no wording, no trigger and no threshold for it, so the evidence has to sit in the supplier file.

Key takeaways

  • Annex II to Regulation 1169/2011 names the allergens that Article 21 forces into the ingredient list.
  • Cross-contact wording stays voluntary in the EU, so two suppliers can label one risk differently.
  • Codex now ties a may contain statement to control measures plus a documented risk assessment.
  • Ask for the allergen profile of the whole producing site, never of a single product code.
  • A gluten-free claim is judged on the finished food as sold, so ingredient carry-over counts.

Precautionary allergen labelling starts where Annex II stops

Annex II to Regulation (EU) No 1169/2011 lists 14 substances that cause allergies or intolerances. Article 9(1)(c) makes each one a mandatory particular. The trigger is simple. You used it in making the food, and it stays in the finished product, even in an altered form. Article 21(1) then sets the form. The name goes in the ingredient list, with a clear reference to the Annex II wording. It also has to stand out by font, style or background colour. Precautionary allergen labelling appears nowhere in that Article.

The statement sits outside the whole Annex II mechanism, because it flags an allergen nobody put in the recipe. Buyers meet the question at the spec stage. A freeze-dried gooseberry powder holds no Annex II allergen of its own. The site that dries it may run almond pieces, milk powder or a gluten cereal through the same rooms. Your customer then asks whether the bar carries “may contain nuts”. The answer has to come out of the supplier file.

The Commission confirms the voluntary status directly. Its 2026 allergen campaign page says firms “may use precautionary allergen labelling” where unintended presence is possible. Such statements “must be based on a thorough risk assessment”. Two suppliers can therefore describe one risk in two ways, and both stay legal.

Article 21 fixes how a declared allergen appears on the label

14 entries carry their own carve-outs, and those carve-outs decide real cases. Point 1 covers cereals containing gluten, while it excludes wheat-based glucose syrups and maltodextrins. Soybeans sit at point 6, though the entry excludes refined soybean oil, tocopherols and plant stanol esters. Sulphur dioxide and sulphites appear at point 12, and that entry carries a concentration threshold of its own.

Read the exemptions before you accept a declaration. A supplier who writes “no allergens” may be relying on an exemption without saying so. Ask for the entry number from Annex II and the reason. That single line settles whether the substance reaches your ingredient list.

Emphasis is a second duty. Article 21(1)(b) wants the Annex II name to stand out from the rest of the list. The Commission page on the FIC Regulation calls this a harmonised presentation duty, in force since 13 December 2014. When you buy a compound ingredient, ask for the exact ingredient string. Copy it with the emphasis the supplier used, because your label inherits the duty.

Codex adopted the first international rule in July 2026

7 July 2026 is the date the 49th Session of the Codex Alimentarius Commission adopted guidance on these statements. FAO reported that it lands as an annex to CXS 1-1985, the General Standard for the Labelling of Pre-packaged Foods. The text sets two conditions in sequence. Both have to be met.

Condition one is allergen management. A business applies control measures first. Cleaning, line sequencing, segregation and supplier control all come before any wording. Condition two is a risk assessment, and it has to show that residual risk from unintended presence remains. FoodNavigator described the same rule as a bar on using the statement before those steps.

Codex standards bind nobody by themselves. They matter because national rules and buyer specs copy them. The Commission also tracks the file through the Codex Committee on Food Labelling, which took comments at Step 7 in May 2026. Put the two conditions in your supplier questionnaire now, since the questions will not change when EU wording arrives.

Reference doses turn cross-contact into a number you can audit

2 mg of peanut protein is the FAO and WHO reference dose quoted by Bakery and Snacks. A reference dose states the amount of allergen protein that most allergic people tolerate without a reaction. The full set sits in the FAO and WHO report Risk assessment of food allergens part 2. That meeting reached consensus on reference doses for the priority allergenic foods.

Numbers change the talk with a supplier. Once a reference dose exists, a swab result becomes a pass or a fail against a stated figure. One expert on the FDA panel put the effect plainly. Thresholds tell makers “what adequate means” when they design cross-contact controls.

Treat any single figure with care. New Food Magazine ran a response on the risk of one uniform threshold. It can restrict choice for allergens with a high ED05, such as shrimp. It can also leave people exposed for allergens with a low ED05, such as walnut. The same article reports a sesame trial at 47 ppm in mayonnaise, where 10 laboratories detected nothing.

Method questions follow from that trial. Ask which technique the supplier used, because an ELISA kit and a PCR method answer different questions. The validation matrix matters just as much, since a high fat or high sugar recipe can suppress recovery. Request the limit of quantification in writing, so you know what a clean result actually proves.

Precautionary allergen labelling questions for the supplier questionnaire

Five questions settle most files. Put them in writing, because a verbal answer rarely survives an audit.

  1. Which Annex II allergens are handled anywhere on the site, listed by entry number.
  2. Which of those run on the same line as the product you are quoting.
  3. What separates them: time, space, dedicated kit or a validated cleaning step.
  4. The cleaning validation record, with the method and the limit of quantification.
  5. Wording the supplier puts on its own pack, plus the assessment behind it.

Question 1 covers the most common error. A plant can honestly declare a product code free of nuts. Nuts may still move through the intake bay every week. The site-level answer is therefore the one that protects you. Question 4 matters just as much, because a validation with a high limit of quantification proves very little.

Record the answers in the spec and date them. When the supplier changes its production plan, that dated record shows what you knew and when you knew it.

Gluten-free claims are judged on the finished food as sold

Implementing Regulation (EU) No 828/2014 governs both the “gluten-free” and the “very low gluten” statement, and it has applied since 20 July 2016. The ceilings in the table below attach to the food as sold to the final consumer. They therefore cover gluten carried in by every ingredient, including a fruit powder dosed at a few percent. “Very low gluten” fits only foods made with specially processed wheat, rye, barley or oats. Oats used in either claim need production that avoids wheat, rye and barley, and their own gluten content has to sit at the gluten-free ceiling.

StatementLegal basisNumeric triggerWho decides
Allergen in the ingredient listArt. 9(1)(c) and Art. 21, Reg. 1169/2011presence decidesthe law
Sulphur dioxide and sulphitesAnnex II point 12, Reg. 1169/2011above 10 mg/kg or 10 mg/litrethe law
Gluten-freeAnnex to Reg. 828/2014at most 20 mg/kg of glutenthe law
Very low glutenAnnex to Reg. 828/2014at most 100 mg/kg of glutenthe law
May containCodex annex to CXS 1-1985risk assessment resultthe business

Rank the rows by how the trigger gets proved. The first four rest on a figure anybody can check against a method. The last one rests on a file you build and defend yourself.

Freeze-drying concentrates whatever the fruit brought with it

Water removal raises the share of every solid in the piece. A trace of allergen protein present before drying ends up more concentrated per kilogram. Apply that logic when you convert a supplier result into a figure for your recipe. A result on the dried ingredient already includes the effect. A result on the fresh fruit does not.

Carriers deserve a separate question. Fruit powders sold for dosing accuracy sometimes carry maltodextrin. Wheat-based maltodextrin sits under the point 1 exemption. Ask for the botanical source in writing even so, because an export customer may apply a different rule. Anti-caking agents, flow aids and encapsulation matrices need the same treatment.

Pack format changes exposure too. Bulk powder repacked at your own site picks up your allergen profile, so the BRCGS certified ingredient supply file covers the producing site and your repacking sits outside it. Sealed retail units skip that step. Segregation belongs in the first quotation round for a case like freeze-dried fruit in chocolate and confectionery, where fruit meets nut and milk ingredients in one plant.

Precautionary allergen labelling follows a different list in the US

9 allergens are recognised in the United States. FDA explains that FALCPA named eight in 2004. The FASTER Act added sesame, effective 1 January 2023. Celery, mustard, lupin and molluscs therefore carry no US major-allergen status. Sulphites still trigger a separate US labelling rule. Map the two lists side by side before you ship one batch to both markets.

FDA also treats advisory statements as voluntary. Its guidance allows “may contain” wording where a maker follows good manufacturing practice and takes every precaution against cross-contact. It warns that such wording cannot substitute for those practices. The EU position reads the same way. One allergen assessment can therefore serve both files, as long as you write it against the stricter list.

Keep one master document per ingredient. List the site allergen profile, the line status and the cleaning validation. Add the analytical method and the resulting statement. Then attach the freeze-dried gooseberry specification or whichever raw material sheet applies. At SALESWAVE we confirm the site allergen profile and the available test reports for a named batch, once the documentation scope is agreed.

Frequently asked questions

Is a may contain statement compulsory anywhere in the EU?

No. EU law makes the Annex II declaration compulsory and leaves cross-contact wording voluntary. Any statement you use has to be truthful and backed by a risk assessment.

Does a freeze-dried fruit powder need an allergen declaration at all?

Plain freeze-dried fruit carries no Annex II allergen of its own. The declaration follows the site, the line and any carrier or anti-caking agent in the recipe.

What did Codex change for may contain statements?

Codex adopted guidance as an annex to CXS 1-1985. It ties the statement to allergen management measures plus a scientific risk assessment showing residual risk.

Can I put gluten-free on a bar that uses a freeze-dried fruit?

You can when the finished food as sold stays under the ceiling in Regulation 828/2014. Ask the supplier for the gluten result and the method before you print the claim.

How does a reference dose help a buyer?

A reference dose states the amount of allergen protein that most allergic people tolerate. It turns a swab result into a pass or a fail against a number.

Scroll to Top